Did you know that the predominant cause of motorcycle accidents is the failure of other motorists to detect and recognize motorcycles in traffic? (c.f. The Hurt Report)
If you are considering replacing your original turn signals, why not also improve your visibility simultaneously?
These modern multifunction turn signals share the same construction as our Sequential Flow LED Turn Signals with a clear lens and flexible stem, but their electronics have extra features such as bright Day Time Running Lights (WHITE) for the front and a bright Brake light (RED) for the rear.
This means you have two extra white lights turned on, like your headlight, creating a more distinctive shape in the traffic, whereas, in the rear, you have two additional red lights turning on when braking!
The front and rear pair also use a sequential flow motion (AMBER) for signalling.
Universal mechanical fitting on any bike with M10 stem and nut mounting.
On the electrical side, choose the correct Turn Signal Harness Adapters compatible with your bike (sold separately) to get a proper plug-and-play solution. This harness is a pair of 5" wire leads matching your bike stock connectors for an installation without cutting, crimping, or splicing anything!
Stock connectors guide and links below:
(double-check the picture to confirm your style of connector)
- Suzuki (DRs, DR-Z rear only, V-Strom, and others)
- Kawasaki (KLR650, KLX250/400 and others)
- Yamaha/Suzuki (Tenere 700, DR-Z400/250 front only and others)
- Honda (Africa Twin, CRF250/450L and others)
Note:
- Some bikes, like Honda XR650L, have bullet connectors as OEM connectors. No harness adapters are required for those. The turn signals will connect directly.
- Some bikes need extra-long wire leads, like the DR650, for the rear blinker only. The aftermarket blinker + Harness adapter will still be too short. Choose the extra-long "rear" option for DR650.
Please be aware that you need to make some easy modifications for LED turn signals to work on your bushpig. Check our LED upgrade guide and the products below:
Multifunction LED Turn Signals - Pair
- 9 bright SMD LED
- Built-in sequential function
- Daytime Running Lights function for the Front pair
- Brake light function for the Rear pair
- Flexible stem design
- IP68 Sealed design
- Universal M10 single hole mounting
- 12" wire lead with universal bullet style connectors
- 12" harness to wire-in extra function included
- Stock harness adapters available separately
